3D PRINTED RC MARS ROVER || USING SG90 SERVO MOTOR ||

Materials & Supplies:

You will need some supplies to build one of your own. 
Below are links to where you can find the parts on Amazon.

• ➣ 3D Printed Part  
  

• ➣ Servo Motor  amazon.in 

• ➣ Female to Female Jumper Wire  amazon.in 

• ➣Custom Connector

• Zero PCB  amazon.in 
• Male pin Header  amazon.in  

• ➣ 12v Battery Pack

• 18650 battery Holder  amazon.in 
• 18650 Lithium Battery  amazon.in  

• ➣ DC to DC Converter  amazon.in  

• ➣ Screw  

• ➣ Nut & Bolt

• ➣ Bearing 606-2RS 

• ➣ Transmitter or Receiver  amazon.in  

  

Tools:

• ➣ 3D Printer  amazon.in 
• ➣ PLA Filament

• Black Filament  amazon.in  
• Red Filament  amazon.in  

• ➣ Soldering

• Solder Iron  amazon.in   
• Soldering Wire  amazon.in 
• Solder Paste  amazon.in  

• ➣ Screw Driver  amazon.in                                  

Schematic :

STL file for 3D printing :

https://drive.google.com/drive/folders/1bbHH00aSsJ_7YITKZTLZ49BBq3gr1e5F?usp=sharing

Print Information :

Software Name - Ultimaker Cura

Printer Name -  Creality Ender 3

Quality :- Layer Height ➣ 0.3 mm Shell :- Wall Thickness ➣ 0.8 mm Wall Line Count ➣ 2 Top/Bottom Thickness ➣ 1.18 mm Top ➣ 1.18 mm Top Layers ➣ 4 Bottom Thickness ➣ 1.18 mm Bottom Layers ➣ 3 Horizontal Expansion ➣ 0 mm Infill :- Infill Density ➣20% Infill Pattern ➣Cube

Material :- Printing Temperature ➣190°c Build Plate Temperature ➣50°c Travel :- Enable Retraction ➣✓ Z Hop When Retracted ➣☐ Cooling :- Enable Print Cooling ➣✓ Fan Speed ➣100% Support :- Generated Support ➣☐ Build Plate Adhesion :- Build Plate Adhesion Type ➣None

Project Image: